Almighty

Home seismometer

Shakes your seismometer records show on Almighty's Seismometers layer at your station, with a link to the matching earthquake when there was one near in time.

1. Register in the Almighty app

There is no sign-up on this website. Open Almighty (the iPhone and iPad app, the Android app or the web app) and go to Settings → Contribute → Join Almighty Contribute. Sign in with Apple or with a code sent to your email (not as a guest), choose a display name and accept the contributor terms.

Then tap Add a station, choose Seismometer, give it a name and set its place on the map. The app shows the station's key, which starts alm_st_. Copy it straight away: it is shown once only. If you lose it, make a new key in the app (the old one stops working).

Everyone else sees your station's place rounded to about 1 km, never the exact spot. What it sends is shared under CC BY 4.0 and credited "Data © Almighty contributors (CC BY 4.0)".

2. Raspberry Shake owners: keep using Raspberry Shake's network

Almighty doesn't take raw seismometer data (the continuous trace). If you have a Raspberry Shake, it already shares its data with Raspberry Shake's own network (ShakeNet), which is the best home for it: it keeps the trace, and scientists and other tools read it from there. Leave that on. What you can add to Almighty is a short report of each shake: when it happened and how strong it was.

3. Send each shake as a report

Send an HTTP POST with the key in the X-Station-Key header. The body is one event, or {"events": [...]} with up to 20. pgv is the peak ground velocity in millimetres a second; pga (peak ground acceleration, m/s²) and duration (seconds) are optional; time is ISO 8601 or Unix seconds.

curl -X POST http://api.almighty.live/v1/contribute/seismic \
  -H "X-Station-Key: alm_st_…" \
  -H "Content-Type: application/json" \
  -d '{"time": "2026-10-20T03:12:45Z", "pgv": 0.42, "pga": 0.013, "duration": 8}'

With a Raspberry Shake

Raspberry Shake's free rsudp program reads the Shake's live data on your own network and has an alert that runs your own code when the ground shakes. Have that code work out the peak velocity from the counts with your Shake's sensitivity (on its instrument page) and send the report above. Send only alerts, not every few seconds of data.

4. Checks on your reports

Limits

Help

Questions, or something not working? Email bonnyjames0@gmail.com with your station's name (never its key). See also Contribute to Almighty and Open data.