Almighty

Contribute › Become a feeder

Become an Almighty Feeder

An ADS-B receiver picks up the radio messages planes send out about where they are. Put one on your roof or in your loft, and the planes it hears appear on Almighty's map for everyone. A small computer, a radio stick and an antenna are all it takes.

Why feed Almighty

Almighty is a free app. It shows ads to pay for its servers, and it has no paid tier. Most of the planes on its map come from open, volunteer-run networks such as adsb.lol. Our own feeders fill in the gaps and help work out the positions of planes that don't broadcast them (MLAT). If you feed us, this is what we promise:

As thanks, while your receiver feeds:

If you don't want any of that, feeding adsb.lol alone helps Almighty too, because we show its data.

1. Register in the Almighty app

There's no sign-up on this website. You become a feeder in the app, and the web app counts as the app, so you can do it from any computer.

  1. Open Settings → Contribute → Join. Sign in (with Apple, or with a code sent to your email), choose a display name, which is shown publicly, and accept the Contributor Terms. You must be 16 or older.
  2. In Contribute, tap Become a feeder (or Add a station → ADS-B receiver).
  3. The app shows your station key once, with the one-line command below and a Copy button. Copy it straight away: the key is stored only as a hash, so it can't be shown again. (If you lose it, make a new key for the station in the app; the old one stops working.)
  4. The app then waits: "Waiting for your first planes…" turns green when your receiver's data arrives.

2. What you need

Rough UK prices in October 2026. Prices change, and you can buy these anywhere: we have no affiliate links and don't recommend any shop.

ItemWhat to look forAbout
Small computerRaspberry Pi 4 Model B, 2 GB, with the official USB-C power supply£45 + £8
Memory card32 GB microSD card, A1 rated£8
Radio stickFlightAware Pro Stick Plus (the blue one, with a 1090 MHz filter and amplifier built in)£35–45
AntennaA 1090 MHz antenna, such as the FlightAware 26" outdoor antenna. Or start with a cheaper indoor or whip antenna£50–60
CableLow-loss coax (LMR-240, LMR-400 or similar), as short as you can, with the right ends: usually N-type (antenna) to SMA (stick)£10–25
OptionalA case for the Pi, and an ethernet cable (Wi-Fi works too)£5–10

In total, about £155–190 with the outdoor antenna, or about £110–130 if you start with an indoor antenna and upgrade later.

You don't need a new Pi. Any Linux computer running Debian, Ubuntu or Raspberry Pi OS (arm64, armhf or amd64) works: an old PC or a Raspberry Pi 3 is fine for one receiver.

3. Where to put the antenna

The antenna matters more than anything else. ADS-B travels in straight lines, so the antenna needs to "see" as far as it can.

4. Two ways to set it up

A. The adsb.im feeder image (easiest for a new Pi)

adsb.im makes a ready-made, free system for the Pi that you set up in your browser.

  1. Download the adsb.im image for your Pi from their website, and write it to the microSD card with Raspberry Pi Imager or balenaEtcher.
  2. Put the card in the Pi, plug in the radio stick, antenna and power, and wait a few minutes. Then open the feeder's page in your browser (adsb.im's instructions say how to find it) and follow its setup. Enter your receiver's location and height there: MLAT needs it.
  3. Then run the one-line installer (B, below) on the Pi, with your station key. Almighty's feed server takes the feed over a secure WebSocket rather than the usual raw connection, so a small bridge program has to run next to adsb.im; the installer sets it up and adds Almighty to adsb.im's list of aggregators.
  4. In adsb.im, under Setup → Data sharing, tick Almighty, put your feeder UUID (the one the app shows with your station) in its UUID box, and press Apply.

B. The one-line installer (any Pi or Debian/Ubuntu computer)

This works on a fresh system and on one that already feeds other networks. Run it on the receiver, with your station key from the app:

curl -fsSL https://almighty.live/feed/install.sh | sudo bash -s -- YOUR-STATION-KEY

What it does:

Afterwards, sudo almighty-feed status shows whether it's connected, and sudo almighty-feed uninstall takes Almighty off again.

Before you run any curl … | bash command, it's good practice to read the script first: read the installer script.

Already run ultrafeeder or plain readsb and prefer to edit the configuration yourself? See Connect an ADS-B receiver by hand.

5. Check it works

Your station's card in the app (Settings → Contribute) shows your feeder dashboard:

The same page is on the web at https://feed.almighty.live/feeder/YOUR-FEEDER-UUID. It can take a minute after you connect. Whether the feed server itself is up is on the network status page.

6. What feeders get

Everything in Almighty is free for everyone anyway, and nothing is sold. As thanks, while one of your ADS-B or AIS receivers has sent data in the last 7 days:

7. Your privacy

What we do with your data

The details are in the Privacy Policy's section on contributing.

8. A free receiver kit?

Some places on the map have no feeders at all. If you live in one, you can apply for a free receiver kit in the app: Settings → Contribute → Apply for a free receiver. You need to have joined Contribute first. The application asks for:

We review applications and can't send a kit to everyone. One application per person a year.

9. Questions

What hardware do I need?

An RTL-SDR radio stick made for 1090 MHz, an antenna for 1090 MHz, and a small computer such as a Raspberry Pi: about £100–130 to start with an indoor antenna, more with a good outdoor one. See What you need. If you already have a receiver feeding another network, you don't need anything new.

Will it slow my feeder down?

No. Sending to one more network is a single extra network connection from readsb, with the data reduced before it's sent. On a Raspberry Pi 3 or newer you won't notice it, and your other feeds carry on exactly as before.

What about my privacy?

Your receiver's exact position is never shown anywhere: the public sees your station to about 1 km, and the coverage map shows where planes were heard, not where receivers are. We never publish your IP address. Your name appears only where you choose (leaderboards, the coverage map), and only with your country. See Your privacy.

What if I stop?

Nothing bad happens. The perks end 7 days after your receiver last sent data, and ads come back. Ask us and we delete your feeder's records, or delete your contributor data yourself in the app (Settings → Contribute). You can come back whenever you like.

Does it cost anything to feed?

Only electricity and a little internet. A Pi uses about 3–5 W, roughly £10 a year at UK prices, and sends a few kilobits a second of upload.

Can I feed other networks too?

Yes. Feeding Almighty doesn't stop you feeding anyone else, and the installer leaves your other feeds as they are.

Will it slow my internet down?

No. A few kilobits a second is far less than a video call or even a music stream.

Is receiving ADS-B legal?

Lots of people receive and share ADS-B in the UK and many other countries, but the rules differ from place to place, and a few countries restrict it. Check the rules where you live. This isn't legal advice.

How do I stop?

Run sudo almighty-feed uninstall (or remove the Almighty lines from your configuration), and turn the station off or remove it in the app. To have your UUID's records removed, contact us with the UUID.

Thank you for feeding.